Part No: JK250FE
RRP $  1580 Kit

CalOffroad - Jeep JK  - 2.5" Lift Kit - Fox 2.0 Evolution Series IFP Shocks, CalOffroad Platinum Series Tapered Wire Coils.

This Kit Pairs the CalOffroad platinum coils to the Fox 2.0 Evolution Series IFP Smooth Body Shocks.

Fox 2.0 Evolution Series IFP smooth body shocks give you increased ride quality and the control you need when heading into the unknown. They use our proven damping technology to provide a comfortable on-road ride and predictable off-road handling in a variety of conditions. The large 5/8 inch alloy steel shock shaft adds increased strength and rigidity. The shafts are NitroSteel® hard-coated to resist pitting and scratches that can damage shaft seals. Our Internal Floating Piston (IFP) separates the shock oil from the high-pressure, nitrogen charged gas chamber. The IFP eliminates oil aeration allowing maximum performance from the factory-tuned precision valving. Our bolt on, 2.0 Evolution Series IFP shocks provide increased damping in any terrain. Experience for yourself the added performance and precision control Evolution Series smooth body shocks deliver

CalOffroad Platinum Series Tapered Wire Springs utilise the latest in coil spring technology to bring you the smoothest riding coils in the industry.
Using tapered wire and progressive pitch technology this spring provides comfort while reducing body roll and allows the correct ride height.
CalOffroad tapered wire coils use only the highest grade bar peeled high stress X5K steel in all our tapered wire range.
CalOffroad platinum series coils can give maximum long travel and can also increase up travel where other coils will bottom out and cause shock or mount damage.
CalOffroad Platinum series long travel JK coils come in a left and right specific to correct RHD Jeep JK. Also available in a LHD version.

Part No: 983-50-001

RRP $220 Each

Jeep JK - Fox Shock  Front - 2.0 Evolution Series IFP Smooth Body  Shock  0 - 3.5" inch Lift

Overview - Specifications

Body : 2.0" Smooth bore and honed seamless alloy bodies
Body Plating : Thick silver powder coat
Internal Reservoir : Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
Shaft : 5/8" NitroSteel® alloy steel
Oil : JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Bushings : Quiet nitrile rubber allows for increased suspension articulation
Mounting : Direct replacement for stock and aftermarket lifts kits

Part No: 983-50-003

RRP $220 Each

Jeep JK - Fox Shock  Rear - 2.0 Evolution Series IFP Smooth Body  Shock  0 - 3.5" inch Lift

Overview - Specifications

Body : 2.0" Smooth bore and honed seamless alloy bodies
Body Plating : Thick silver powder coat
Internal Reservoir : Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
Shaft : 5/8" NitroSteel® alloy steel
Oil : JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Bushings : Quiet nitrile rubber allows for increased suspension articulation
Mounting : Direct replacement for stock and aftermarket lifts kits

Part No: JK250FP

RRP $  1680 Kit

CalOffroad - Jeep JK  - 2.5" Lift Kit - Fox 2.0 Performance Series IFP Shocks, CalOffroad Platinum Series Tapered Wire Coils.

This Kit Pairs the CalOffroad platinum coils to the legendary Fox 2.0 Performance Series IFP Smooth Body Shocks and you have the Ultimate Fox ride.

Fox 2.0 Performance Series IFP smooth body shocks contain the latest in shock technology to transform the performance of your Truck or SUV.
They use our race-proven damping control to provide a comfortable on-road ride and predictable offroad handling in even the toughest conditions.
The precision metal impact aluminum body increases cooling capacity and will never rust.
Inside you will find our race-proven performance valving technology Our Internal Floating Piston (IFP) mono-tube design separates the shock oil from the high-pressure, nitrogen-charged gas chamber.
The IFP eliminates oil aeration allowing maximum performance from the factory-tuned precision valving.
The race developed high flow damping piston matched with application specific vavling provides the 2.0 Performance Series IFP shock a predicable ride quality capable of handling the roughest road conditions.

CalOffroad Platinum Series Tapered Wire Springs utilise the latest in coil spring technology to bring you the smoothest riding coils in the industry.
Using tapered wire and progressive pitch technology this spring provides comfort while reducing body roll and allows the correct ride height.
CalOffroad tapered wire coils use only the highest grade bar peeled high stress X5K steel in all our tapered wire range.
CalOffroad platinum series coils can give maximum long travel and can also increase up travel where other coils will bottom out and cause shock or mount damage.
CalOffroad Platinum series long travel JK coils come in a left and right specific to correct RHD Jeep JK. Also available in a LHD version.

0 to 3" Lift
Part No: 980-24-887
RRP $250 Each

4" to 6" Lift
Part No: 980-24-641
RRP $255 Each

Jeep JK - Fox Shock  Front - 2.0 Performance Series IFP Smooth Body  Shock - 0 to 3" Lift or 4" to 6" Lift

Overview - Specifications

Body : 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
Body Plating : Clear-anodized for a durable finish
Internal Reservoir : Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
Components : Black-anodized, CNC-machined 6061-T6 billet aluminum
Shaft : 5/8" hard chrome plated heat-treated alloy steel
Piston : Race-developed high-flow piston design
Valving : Application specific valving to maximize performance
Seals : Redundant sealing pack system main seal, wiper seal, scraper seal
Oil : JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Bushings : Quiet nitrile rubber allows for increased suspension articulation
Mounting : Direct replacement for stock and aftermarket lifts kits

0 to 3" Lift
Part No: 980-24-888
RRP $250 Each

4" to 6" Lift
Part No: 980-24-642
RRP $255 Each

Jeep JK - Fox Shock  Rear - 2.0 Performance Series IFP Smooth Body  Shock - 0 to 3" Lift or 4" to 6" Lift

Overview - Specifications

Body : 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
Body Plating : Clear-anodized for a durable finish
Internal Reservoir : Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
Components : Black-anodized, CNC-machined 6061-T6 billet aluminum
Shaft : 5/8" hard chrome plated heat-treated alloy steel
Piston : Race-developed high-flow piston design
Valving : Application specific valving to maximize performance
Seals : Redundant sealing pack system main seal, wiper seal, scraper seal
Oil : JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Bushings : Quiet nitrile rubber allows for increased suspension articulation
Mounting : Direct replacement for stock and aftermarket lifts kits

Part No: 983-50-000

RRP $220 Each

Jeep JK - Fox Steering Stabiliser - 2.0 Evolution Series Stabiliser IFP 

Overview - Specifications

Body : 2.0" Smooth bore and honed seamless alloy bodies
Body Plating : Thick silver powder coat
Internal Reservoir : Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
Shaft : 5/8" NitroSteel® alloy steel
Oil : JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Bushings : Quiet nitrile rubber allows for increased suspension articulation
Mounting : Direct replacement for stock and aftermarket lifts kits

Part No: 980-24-986

RRP $249 Each

Jeep JK 2007 On - Fox Steering Stabiliser - 2.0 Performance Series Stabiliser IFP - 7.1"

Overview - Specifications

Body : 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
Body Plating : Clear-anodized for a durable finish
Internal Reservoir : Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
Shaft : 5/8" hard chrome plated heat-treated alloy steel
Oil : JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Bushings : Quiet nitrile rubber allows for increased suspension articulation
Components : Black-anodized, CNC-machined 6061-T6 billet aluminum
Piston : Race-developed high-flow piston design
Valving : Application specific valving to maximize performance
Seals : Redundant sealing pack system main seal, wiper seal, scraper seal

Part No: 983-02-070

RRP $550 Each

Jeep JK - Fox Steering Stabiliser - 2.0 Performance Series Stabiliser ATS 1⅜"

Suits 1-3/8" Tie Rod Clamp (Standard Jeep)

Overview - Specifications

Body :2.0" Metal impacted 6061-T6 aluminum will resist rust over time
Body Plating : Clear-anodized for a durable finish
External Reservoir : External reservoir design separates shock oil from the high-pressure nitrogen
Shaft : 5/8" hard chrome plated heat treated alloy steel
Oil : JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Bushings : Quiet nitrile rubber allows for increased suspension articulation
Mounting : Direct replacement for stock and aftermarket lifts kits

Mounting Clamp : 1-3/8" tie-rod mounting clamp is included

Part No: 983-02-088

RRP $550 Each

Jeep JK - Fox Steering Stabiliser - 2.0 Performance Series Stabiliser ATS 1⅝"

Suits 1-5/8" Tie Rod Clamp

Overview - Specifications

Body :2.0" Metal impacted 6061-T6 aluminum will resist rust over time
Body Plating : Clear-anodized for a durable finish
External Reservoir : External reservoir design separates shock oil from the high-pressure nitrogen
Shaft : 5/8" hard chrome plated heat treated alloy steel
Oil : JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Bushings : Quiet nitrile rubber allows for increased suspension articulation
Mounting : Direct replacement for stock and aftermarket lifts kits

Mounting Clamp : 1-5/8" tie-rod mounting clamp is included

RRP $ 49.95 Each

Jeep JK - Track Bar Relocation Bolt

Effectively move steering stabilizer for higher clearance mounting with replacement Track Bar Relocation Bolt.

RRP $ 150 Each

Jeep JK - Fox Tie Rod Clamp - 1⅜", 1½", or 1⅝"

Universal Aluminum Tie Rod Mounting Clamp

Attractively anodized and laser etched Universal Aluminum Tie Rod Mounting Clamp securely attaches steering stabilizer to either 1 3/8, 1 1/2, or 1 5/8 inch tie rods.

Part No: 803-02-040 1 3/8 inch Universal Aluminum Tie Rod Mounting Clamp
Part No: 803-02-056 1 1/2 inch Universal Aluminum Tie Rod Mounting Clamp
Part No: 803-02-039 1 5/8 inch Universal Aluminum Tie Rod Mounting Clamp

PartNo:803-02-052KIT
RRP $50 Pair

Jeep JK - Fox Shock  Rear - Optional Roost Shield / Shaft Guard.

Protect the shock shaft and seals from rocks kicked up by tyres.
The Roost Shield securely attaches to 2.0 Performance Series IFP and 2.0 Evolution Series IFP shocks.

Medium Duty
Part No: CSJK25MF
RRP $ 350 Pair

Heavy Duty
Part No: CSJK25HDF
RRP $ 350 Pair

Jeep JK -  CalOffroad Platinum Series Long Travel Tapered Wire Coil Springs - 2.5" Lift -  Front - Medium or Heavy Duty

CalOffroad utilise the latest in coil spring technology to bring you the smoothest riding coils in the industry.
Using tapered wire and progressive pitch technology this spring provides comfort while reducing body roll and allows the correct ride height.
CalOffroad tapered wire coils use only the highest grade bar peeled high stress X5K steel in all our tapered wire range.
CalOffroad platinum series coils can give maximum long travel and can also increase up travel where other coils will bottom out and cause shock or mount damage.

CalOffroad Platinum series long travel JK coils come in a left and right specific to correct RHD Jeep JK. Also available in a LHD version.

Medium Duty
Part No: CSJK25MR
RRP $ 350 Pair

Heavy Duty
Part No: CSJK25HDr
RRP $ 350 Pair

Extra Heavy Duty
Part No: CSJK25EHDR
RRP $ 350 Pair

Jeep JK -  CalOffroad Platinum Series Long Travel Tapered Wire Coil Springs - 2.5" Lift -  Rear - Medium, Heavy Duty or Extra Heavy Duty

CalOffroad utilise the latest in coil spring technology to bring you the smoothest riding coils in the industry.
Using tapered wire and progressive pitch technology this spring provides comfort while reducing body roll and allows the correct ride height.
CalOffroad tapered wire coils use only the highest grade bar peeled high stress X5K steel in all our tapered wire range.
CalOffroad platinum series coils can give maximum long travel and can also increase up travel where other coils will bottom out and cause shock or mount damage.

CalOffroad Platinum series long travel JK coils come in a left and right specific to correct RHD Jeep JK. Also available in a LHD version.

Part No: JKFPS75
RRP $149 Pair

CalOffroad Jeep JK Front Coil Spacers

20mm Coil Spacers to suit the Front of Jeep JK

Part No: PHJKF
RRP $280 Each

Jeep JK - CalOffroad Front Adjustable Panhard Rod / Trackbar - Includes Rod Ends

RHD Includes Rod ends.
Improve wheel alignment track on lifted vehicles.
Includes new bushes at both ends.
Made from heavy wall seamless tube TIG welded.
Corrosion protection coating.

Part No: PHJKFHD
RRP $395 Each

Jeep JK - CalOffroad Front Adjustable Panhard Rod / Trackbar - Heavy Duty

Recommended for Big Lifts and Large Tyres

RHD Includes Rod ends.
Improve wheel alignment track on lifted vehicles.
Includes new bushes at both ends.
Made from heavy wall seamless tube TIG welded.
Corrosion protection coating.

Part No: PHJKR
RRP $295

Jeep JK - CalOffroad Rear Adjustable Panhard Rod / Trackbar - Includes Rod Ends

RHD Includes Rod ends
Improve wheel alignment track on lifted vehicles.
Includes new bushes at both ends.
Made from heavy wall seamless tube TIG welded.
Corrosion protection coating.

Part No: PHJKRHD
RRP $395

Jeep JK - CalOffroad Rear Adjustable Panhard Rod / Trackbar - Heavy Duty

Recommended for Big Lifts and Large Tyres

RHD Includes Rod ends
Improve wheel alignment track on lifted vehicles.
Includes new bushes at both ends.
Made from heavy wall seamless tube TIG welded.
Corrosion protection coating.

Part No: PHBJK
RRP $35 Each

Jeep JK - CalOffroad Panhard Rod Bushes - Front and Rear

CalOffroad Panhard Rod Rod - The Ultimate Poly Convex Technology bushing system.
Available in 39mm or 40mm to suit CalOffroad and other Jeep Panhard Rods.

Help eliminate tyre wobble with the latest technology in Panhard bushes.

CalOffroad Poly Convex Technology bushing system allows the most articulation without destroying itself like most other bushes on the market.
The CalOffroad Poly Convex Technology bushing is a poly bush that works.
Similar to a heim joint but is more suited to Australian road laws.

Specify 39mm or 40mm on order.

Proudly Australian owned and made in Australia